The diagram below shows how geothermal energy is used to produce electricity.
The flow chart illustrates electricity producing process with geothermal energy. Generally speaking, there are 6 main stages in the process, including on the ground and underground.
First and foremost process is started by collected cold water is pumped down in 4,5 km underground through the injection well. Following this the pumping down cold water is converts at a geothermal zone with hot rocks into the hot water. Once, the heated water is it pumped up by production well to condenser at ground into the steam.
In the last 2 stages, the steam is powered in turbine, they are ready to produce electricity at generator. Finally, produced electricity is carried and stored by power lines to electrical building.
| Post date | Users | Rates | Link to Content |
|---|---|---|---|
| 2024-12-21 | nobitaa | 73 | view |
| 2024-12-20 | khanhkhanhlhp | 78 | view |
| 2024-12-11 | nguyendangquang.aspect | 11 | view |
| 2024-12-08 | nguyendangquang.aspect | 73 | view |
| 2024-11-29 | Nguyen Thinh | 84 | view |
- The map below shows the development of the village of Ryemouth between 1995 and the present 78
- In spite of the advances made in agriculture many people around the world still go hungry 11
- The first chart below shows the results of a survey which sampled a cross section of 100 000 people asking if they traveled abroad and why they traveled for the period 1994 98 The second chart shows their destinations over the same period 61
- The maps below show the centre of a small town called Islip as it is now and plans for its development 67
- The graph shows Underground Station passenger numbers in London Summarise the information by selecting and reporting the main features and make comparisons where relevant